
Add to Cart
4G LTE Wifi Router: FDD-LTE Cat3 100 Mbps DL/50Mbps UL, UMTS R99 384 kbps DL/UL
Item ID: GW111
Model: 4G LTE Router (Wifi hotspot)
Platform: MDM9610
SA Time: 11.2016
Band/Mode: FDD-LTE: B1/B3/B5/B7/B8/B20
UMTS:B1/B8
GSM Quad Band
Type: Portable hotspot device with LCD or LED light
Size(mm): 86*76*22mm
Weight(g): 158g
System memory: NandFlash 1Gb+512Mb
Hardware Description
CPU (MHz): 550MHz (MDM9610)
Air interfaces: GSM/GPRS/EDGE (DTM (simple class A), multislot class 12)
UMTS (R99 384 kbps DL / UL, R5 HSDPA 7.2 Mbps DL, R6 HSUPA 5.76 Mbps UL, R7 HSPA+ 21 Mbps DL / 5.76 Mbps UL,R8 DC-HSPA+ 42 Mbps DL / 5.76 Mbps UL)
FDD-LTE (Cat3 100 Mbps DL / 50Mbps UL)
WIFI | ||
Frequency Band | 2.4GHz | |
802.11b/g/n | up to 150Mbps | Modes supported: 802.11b mode 802.11g only mode 802.11n only mode 802.11b/g only mode 802.11b/g/n mode 802.11n 1x1 (2.4GHz, 20MHz) |
User amount | Up to 10 | |
AP Features | Security modes | Open WEP WPA-PSK WPA2-PSK WPA-WPA2 Hybrid mode (Mixed Mode) TKIP-CCMP Hybrid mode (Mixed Mode) WPS 2.0 Hidden SSID supported |
Concurrency (FC quality for LE1.0) | AP-STA mSSID (AP-AP) – up to 2 SSID's STA-STA communication block/allow between two SSIDs Independent security modes (Open, WEP, WPA, WPA2, WAPI) for concurrency modes above except WEP in both interfaces Channel of operation - same channel | |
Other | QoS and PS WMM WMM-PS/uAPSD ERP protection Coexistence LTE coexistence (static channel selection) Data Switching/Forwarding Switching of packets amongst clients Support for forwarding data to and from WAN VPN Pass-through | |
Interface | ||
Antenna | 4G/3G/2G Main antenna 4G MIMO/3G Rx Diversity antenna WiFi antenna | Internal |
LCD | 1.46" 128×128 TFT | |
USB | Micro USB | USB 2.0 High Speed |
SIM/USIM Card slot | Yes | Standard 6 PIN SIM card interface, compliant with 3GPP 31.101 and 31.102 |
Micro-SD Card slot | Yes | |
Size (mm) | 86*76*22mm | |
Weight(g) | Around 252g | |
Button | ||
Power | Yes | |
WPS | Yes | |
Reset | Yes | |
Battery | ||
Lion battery | 5200mAh | 18650 Lion Battery with PowerBank |
Other Description | Item | |
Electrical performance spec | ||
RF Power Spec | Class 4 for UMTS/HSPA/LTE; Class 4 for GSM 850/900; Class 1 for GSM 1800/1900; Class E2 for EDGE 850/900/1800/1900 | |
Environmental reliability test condition | ||
Normal Operation | 0°C to +45°C | |
Restricted Operation | -10°C to +55°C | |
Storage | -20°C to +70°C | |
Compliance | ||
ROHS | Yes, EU RoHS | |
JATE | Yes | |
TELEC | Yes | |
PSE | Yes | |
others | depend on customer required | |
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: Do you provide PCBA board order only?
Of course, as a OEM/ODM manufacturer, we can provide PCBA in a short time with good quality.
Q3: Can you desin products as per customer's requirements?
Yes, of course. We have our own R&D department, we have ability to design and produce at same time.
Q4. How to proceed an order?
A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Then we arrange the production.
Q5. What is your payment term?
We have Ali- pay, T/T, Visa,Western Union payment terms options, you can choose the one which is convenient or effective for you!
Q6. Can you customized logo and packaging?
A: Yes, OEM/ODM are acceptable. Our design team will help you design as your requirement.